Gemite Group of Companies; A global provider of innovative construction chemicals

Gemite Group of Companies; A global provider of innovative construction chemicals
Gemite Group of Companies; A global provider of innovative construction chemicals
Gemite Group is a multifaceted Group of Companies, Distributors and Licenses providing premier solutions to customers, wherever they may be. Gemite delivers a complete line of exceptional construction chemicals and building products and provides unmatched technical support to resolve our customers’ challenges in the most efficient and economical way possible. Gemite delivers every product necessary for a successful project – from start to finish, from a single source and for years to come.

Waterproofing Products
1. Cem-Kote CW Plus – Advanced Crystalline Waterproofing for concrete
Conventional (old-style) crystalline waterproofing reacts with free lime to form crystals that “plug” concrete capillaries. It works but main problem is the time required for this reaction to take place. It may take a few weeks before the structure is waterproofed, which in many instances is not practical. Gemite solution was to combine 2-waterproofing mechanism, crystalline penetration + membrane mechanism into one product Cem-Kote CW Plus that waterproof in only 24-48 hours. Cem-Kote CW Plus is also very tough and abrasion resistant and it can be used as a traffic topping, whale providing waterproofing.
Cem-Kote CW Plus has been certified for contact with potable water in North America, ANSI/NSF Standard 61 and in European Union (CE).
2. Adi-Con CW Plus – Crystalline Admixture for concrete
Adi-Con CW Plus is crystalline based dry admixture for concrete that is highly effective, especially at higher water-cement ratios, that are common in concrete without water reducing agents. It is added into concrete during mixing, but it can be also added into the mixing track. Adi-Con CW Plus seals drying shrinkage cracks, but as any crystalline admixture there is limit on waterproofing the larger dynamic cracks or poorly compacted concrete.
Unique products
3. Fibre-Prime – Cement Based Rustproofing – special rustproofing for wet environments
Fibre-Prime is unique rustproofing, cement-based slurry, with many advantages over polymer based (epoxy / polyurethane) ant-corrosion barrier systems. Fibre-Prime does not need “white metal” surface, only removal of loose rust removal by sandblasting or mechanical steel brushes is needed. It can be also applied to saturated concrete surfaces, even at 100% relative humidity, and to steel with water condensation on the surface. Fibre-Prime provides effective rustproofing even over areas of reinforcing steel embedded in concrete. Unlike conventional epoxy/urethane systems, it is insensitive to formation of ”flush-rust” that forms shortly after steel surface preparation.
4. Nano-Shield OSP – Organic Solvent Protection for Industrial Wastewater Plants
Nano-Shield OSP (organic solvent protection) is one component dry powder material that protects and waterproofs concrete against penetration of organic solvents and oils in industrial wastewater facilities (oil and petrochemical), and concrete secondary containment structures with primary tanks holding organic solvents, oils and fuels.
Part of Gemite’s system is a special bonding agent, Cem-Kote Barrier Coat 100, which overcomes the problem of bonding to oil contaminated surfaces.
5. Cem-Kote Flex CR – Chemical Resistant Waterproofing for Wastewater, Sewers & Manholes
Wastewater facilities, sewers and manholes are exposed to high concentrations of hydrogen sulfide, causing MIC (microbiologically induced corrosion) by forming sulfuric acid on the surface of concrete resulting in rapid concrete deterioration. Epoxies and urethane coatings that have been traditionally used are non-breathable, highly sensitive to moisture, often fail by de-bonding and require very expensive repairs. Gemite provides an easy and much less expensive system consisting of Cem-Kote Barrier Coat 100 as a bonding agent, and Cem-Kote Flex CR top coat providing chemical resistance. The system is completely insensitive to moisture and humidity, during and after installation. Cem-Kote Flex CR is highly flexible and bridges substrate cracks, unlike rigid epoxy and polyurethane. Water based system is safe and easy to apply by spraying or brushing.
6. Damp-Gard – Protection against Raising Damp for New & Existing Structures
Damp-Gard is a line of highly effective, waterborne hydrophobic, oligomeric siloxanes used to Stop Rising Damp, and to Dampproof / Waterproof Concrete, Masonry and Stucco.
Damp-Gard 100 is injected into walls to stop rising damp and dry them, by forming a hydrophobic barrier at the bottom of walls. The typical consumption is 1.5-2 liters (0.4-0.5 USG) per linear meter (3.2 ft). Contact Gemite Products Inc. for application instruction and suitable equipment.
Damp-Gard 200 water-repellant protects concrete, masonry and stucco walls from driving rain, stops wet spots and avoids most efflorescence. It is applied by a low-pressure spray at the rate of 3.8 m2 / L (150 ft2 / USG).
Damp-Gard is also available as Concentrate to qualified distributors (to reduce shipping costs), which is diluted to produce final product. Contact sales@gemite.com.
Key Advantages
1. Waterborne system
2. Non-toxic, non-flammable
3. Breathable
4. Easy to apply
5. Protects against rising damp
6. Protects outside walls from wind driven rain
7. Keeps walls clean
8. Reduces moss and mold formation
9. Protects against surface efflorescence
10. Keeping construction materials dry reduces energy (heating / cooling) consumptions
11. Protects against freeze/thaw damage and cracking

http://gemite.com
+1-905-672-2020
USA, Canada & EU

Send Message to listing owner

Gemite Group of Companies; A global provider of innovative construction chemicals