11 tips on construction equipment safety measures

27
safety measures

Construction equipment is some of the powerful technology there is however, their strong abilities also make them some of the most hazardous machines to run. Although current equipment has supplementary safety features than earlier, operators still need to be attentive and at all times apply caution when controlling the machines.

If you work with whichever sort of heavy equipment, you must have a healthy respect for it. Most, if not all, equipment used in construction, mining, forestry, farming and other trades are gigantic and powerful – and for those grounds, naturally dangerous. And although most of us are well conscious of the risks implicated, each year around the globe there are still thousands of heavy equipment-related unpleasant incidents that lead to property damage or injuries and, unfortunately in some instances, death.

There’s by no means typically one simple comprehensive cause or one type of person we can attribute heavy equipment-related incidents to – they can happen to experienced operators as well as recently trained ones. Evidently each machine and each situation comes with its own set of risks, but there are some universal safety rules you can follow to aid you end each work day in one piece. Working with construction equipment is not an easy job. Whether an operator is a skilled veteran or newly-trained novice, safety is always a crucial matter that needs meticulous attentiveness. Below is a list of fundamental rules and safe work practices that should be observed in addition to any agency-specific safety guidelines.

  1. Make certain you’ve been suitably and adequately trained on the equipment you’re using by qualified, skilled people.

 

  1. Be conscious, stay alert and know your equipment’s blind spots – whether you’re the operator or just working around it.

 

  1. Correspond with people working near you – either via two-way radios or a spotter who’s been trained on standard hand signals. Never presume people know what you’re going to be doing.If ignored this can endanger the safety of everyone

 

  1. At all times wear high-visibility clothing and steel-toed boots.

 

  1. At all times wear your seat belt. It seems apparent, but it’s easily forgotten. In case of a rollover this can be a life saver.

 

  1. Don’t mount  or alight the equipment while it’s moving.

 

  1. Never surpass the load that a machine is rated to carry.

 

  1. Climb on and off equipment properly. Falls are still the number one cause of injury, so never jump off equipment and always use three-point contact (both feet and one hand or one foot and both hands on the holds at all times) when climbing on or off equipment. Every person is not the same, and you can’t assume that manufacturers have your precise height and build in mind when designing their machines. Do yourself a favor and make it as simple and as safe as possible to mount and dismount your vehicle.

 

 

  1. Always do a walk around and inspect the equipment before you start using it. Inspect tires, tracks, components and other apparatus for fractures, damage or something caught in them.

 

  1. Always load and unload equipment on level ground to reduce the risk of rollovers, and keep the area clear.

 

  1. Exiting the vehicle

Park on level ground. Relieve pressure from all hydraulic controls. Wait for all motions to stop,   safely dismount using the 3-point contact rule. Remove the key from unattended vehicles

Always remember that safety measures are fundamental and one can always be sued for negligence if you ignore the safety guidelines.

NO COMMENTS

LEAVE A REPLY