HomeKnowledgehome and officeCommon causes of leaky faucets

Common causes of leaky faucets

The faucet is something which we use frequently, it is an indispensable part of our lives. Keep them in good condition will help us to perform our day to day task effortlessly. The steady dripping of a leaky faucet is one of the most common household problems. It happens so commonly that we may not even notice when one of ours is leaking water after we shut it off. But consider this: a faucet that drips once every second can waste roughly five gallons of water per day.

In this article we’ll take a look at the different types of faucets and the common causes of leaky faucets in your home. The common causes of leaky faucet includes the following;

1. Old washer
Search for construction leads
  • Region/Country

  • Sector

A defect in the washer is one of the common causes of leaky faucet. Every time you use the faucet, the washer is pressed against the valve seat, and because of the frequent pressure, the washer wears out over time. As a result, you will see water is dripping in the spout area. The defect in rubber washers also causes dripping faucet problem and replacement is the right solution here.

2. Parts of the faucet get loosened

Because of repeated use, the ring and the packing nuts in the faucet may get loosened and cause the dripping faucet. If you find out the leakage is originating from the handle, then you can either tighten it or replace it. Due to continuous usage, the adjusting ring and packing nuts in the steam screw may become loose, causing leakage near the handle of the faucet. If there is leakage from the handle, either you need to tighten the packing nut or completely replace it to get rid of this dripping faucet problem.

3.Corroded Valve Seat

A valve seat is something which establishes the connection between the faucet and the spout. Over time because of water sediments get accumulated in the valve makes it prone to corrosion. This causes leakage around the spout area and causes the dripping faucet condition. To prevent this to happen, you should clean the valve seat at regular intervals through a professional plumber.

If you have a remark or more information on this post please share with us in the comments section below


  1. Yes..it’s true. I will suggest the readers to go for Zurn products as such it provides Touchless solutions that activate with a sense for the user and environment. Choose from a variety of configurations and finishes across our zurn sensor faucet portfolio. While the aesthetics differ, you can depend on the same proven features protecting your people and facility with touchless solutions. Every model within our curated selection is constructed of the highest quality cast brass and meets ADA compliance providing a hygienic solution.

    The watersense low-flow options allow building owners to save water without sacrificing the handwashing experience. Rounding it off is the precision.The faucet activates without delay or too much force. When it comes to users and the environment, get a better sense from your restroom.

  2. It really helped when you stated that sediment buildup from overtime use can corrode a faucet’s valve seat. As I was helping my aunt perform preparations for the holiday months at her house, I noticed that a number of her faucets were leaking like crazy. She told me that this was something that’s been happening for a while, so she just ignored it. Considering how old her house is, it might be possible that these faucets are already corroded, so I’ll do her a favor and have a plumber help us replace these before the holidays start.


Please enter your comment!
Please enter your name here