This versatile range of AHUs from TROX Technik uses high impact-resistant rigid PVC for casing frames, thus totally eliminating any chance of thermal bridging occurring. The PVC extrusions are treated with enhanced heat stability UV agents which enhances durability of the units against sun exposure.
A further major advantage of the PVC frames is that they are completely corrosion resistant, which makes these AHUs ideal for use in areas of high moisture and salt content.
31 standard sizes in vertical or horizontal configuration.
Suitable for airflows from 0.5m3/s to 25.7m3/s
E-Cube casings comply with EN1886 standards
- Ultra-low leakage
- Casing strength
- Thermal transmittance
- Thermal bridging
- Filter bypass leakage
Choice of panel materials
- Galvanised steel
- Stainless steel
- Chromadek
- Aluminium
Insulation options
- Polystyrene
- Polyurethane
Choice of fan types
- Backward curved
- Forward curved
- BC plug
Coil options
- Chilled water
- DX
- Hot water
- Steam
Large variety of additional options, including
- Mixing boxes and discharge plenums
- Heat recovery wheels
- Electric heating
- Heat-pipe coils
- Humidifiers
- Filters
Delivery options
- Complete fully assembled unit.
- Flat-pack: unit is dismantled for delivery and rigging and then re-assembled on site by TROX personnel.
- Split modules: unit is split into separate modules for transportation and rigging.
Contact us for more information,
Johannesburg: +27 (0) 11 462 6274 | [email protected]
Durban: +27 (0) 31 579 4000 | [email protected]
Cape Town: +27 (0) 21 594 3006 | [email protected]
Port Elizabeth: +27 (0) 41 487 3211 | [email protected]
