Before anyone needs site access, check how the contract assigns risk and match your contractor insurance package to the project’s scope and delivery method.
Contractor insurance starts with the contract
Check the insurance schedule before mobilization
Before you break ground, compare the job’s scope and contract with policy limits and deductibles. After checking exclusions for planned operations, confirm the effective dates and conditions for subcontractors. Requirements vary across North America by jurisdiction and contract, while coverage varies by insurer and policy.
The insurance schedule needs close reading. Alongside project-specific coverage, check provisions for named insured or additional insured status. To confirm required limits and completed-operations requirements, go through the construction contract with your broker, alongside the policy wording and certificate.
A certificate doesn’t change the policy.

Budget early, but remember that general market trends don’t predict your renewal premium.
Match each site exposure to a specific coverage
Coverage for project property and tools can sit alongside third-party liability in your contractor insurance. There’s no universal package. Design errors and specialized site risks may need separate policies.
Coverage checklist
| Coverage | Exposure to check | Why it may matter before work starts |
|---|---|---|
| Commercial general liability | Third-party bodily injury and property damage | Often required by the client before site access. |
| Installation floater and tools coverage | Materials awaiting installation; mobile tools or equipment | Damage or theft can occur in storage, during transport, or during use on site. |
| Builder’s risk | Structure and specified project property during construction | Establish who buys it and which property is covered. |
| Professional liability | Design or specification errors; professional advice | Relevant when you accept design or advisory responsibility. |
| Pollution liability | Pollutant releases and cleanup costs | General liability may exclude pollution. |
| Wrap-up liability | Large-project liability involving multiple trades | Confirm enrolled parties and project-wide policy terms. |
What general liability does and does not address
Commercial general liability is commonly associated with the older term comprehensive general liability. Under the policy’s terms, contractors’ general liability commonly covers claims for property damage and third-party injury. That coverage can leave professional errors or defective work itself uncovered. Some subcontractor exposures can fall outside it, as can pollution and vehicle losses. HUB International’s 2024 construction outlook states that about 18% of yearly construction and engineering losses are due to defective products and faulty workmanship or maintenance.
Property and professional exposures need separate attention
Before deliveries arrive, check your builder’s risk.
For design or advisory work, contractors should check their professional liability coverage.
Read the limits and subcontractor terms
Limits and deductibles must fit the agreement
A stated liability limit isn’t the whole picture. After comparing per-occurrence and aggregate limits, check the deductibles or self-insured retentions. Check whether the agreement requires project-specific limits after confirming how the policy treats completed operations.
There’s no universal price for a $1 million liability policy. The price reflects your trade and revenue, with payroll and claims history included. Beyond location, insurers consider policy terms and the project type, as well as any subcontracted work.
Exclusions reveal where separate policies may be needed
Review exclusions for professional services and pollution, as well as vehicle losses or damage to your work. Check residential or project-type restrictions, along with those for high-risk operations. Ask your broker which separate policy or endorsement addresses an exclusion when it affects the work you’ve planned.
Subcontractors need documented coverage
When the contract requires insurance, subcontractors need a policy of their own. Before work starts, collect evidence so you can compare limits against the subcontract’s requirements. Verify policy dates and covered operations, along with any additional insured status that’s required. Request the relevant endorsements, since a certificate won’t tell you whether every loss is covered.
Ask clients to disclose known hazards or prior damage, along with access restrictions and material scope changes. Undisclosed site facts can throw off your project plan and how you assess risk. Damage the owner already knew about, for example, can turn up behind a wall during demolition.
Four practical insurance groups
For contractors, there’s no universal statutory set of four insurance types. Organize your preconstruction checklist into four exposure groups, covering third-party liability; project property plus materials and equipment; design and environmental liability; and project-wide or operational coverage. Those groups describe exposures rather than policies you must buy. The six checklist entries fit within that framework. Commercial auto or workers’ compensation can also be necessary depending on your operations and local requirements, alongside other coverage that the project contract specifies.
Bring the policy back to the project
Check the signed contract and your actual work, including subcontractor arrangements, against the policy wording before you mobilize. Before authorizing site access, sort out mismatches. Instead of copying another contractor’s insurance purchases or using a generic checklist, build the final package around who performs each task and how the project assigns risk. You can work with a specialist broker to compare the scope, contract and certificate requirements before placing contractor insurance.
